Skip to main content

Technical specifications

  • Approved by Anatel.
  • The M-ID10WG is a UHF WiFi RFID module that allows you to read and write tags.
  • Operates in the bands covered by Anatel, from 902 to 907Mhz and from 915.1 to 928Mhz.
  • It has 1 internal antenna of 7.5dBic.
  • Comes with command guide, sample software and SDK for C#.
  • Maximum reading distance of 2m using 26dBm power with Impinj E41 tag
  • Maximum reading speed in inventory mode: 50pcs/second.
  • Maximum operating Temperature: -10º to +80ºc
  • Maximum RF power: 26dBm
  • Communication: WiFi with Wiegand26 output option.
  • Factory Settings
    • Wireless Network Settings
    • Mode of Operation: Access Point
    • SSID Network Name (WiFi): mid10-xxxxxxxx (x = reader's unique ID)
    • Access password (WiFi): viaondarfid
    • Connection Port: 5000
    • IP: 192.168.0.10 / 255.255.255.0 / 192.168.0.1
    • General Parameters
      • Administration Page: http://192.168.0.10
      • Admin username and password: admin/admin
      • Print RFID RX data in Serial Debug: Disabled
      • Print RFID TX data in Serial Debug: Disabled
    • RF settings
      • Operation Mode: Answer Mode
      • Buzzer: On
      • Post Trigger reading interval: 1 second
      • Tag reading interval: Disabled
      • Power of the Antennas: 26dBm
      • Discard Repeated Tag: Disabled
      • Keep output active for...: Disabled
      • EPC Mask: Disabled
      • EPC Mask Hex: [empty]
      • Exclusion list (1 EPC per line): [empty]
  • Operation as Access Point or WorkStation
  • Trigger to start reading
  • Output pulse timer
  • Input pulse timer
  • Tag filter (mask)
  • Black List (Blocked Tags)
  • Supply Voltage: 5v DC
  • Dimensions:
    • Front: 195x195mm
    • Height: 195mm
    • Bracket: 108.01mm Inner Width/150mm Outer Width
    • Depth w/ Reader: 90.19mm
    • Depth w/ Support: 251.48
    • Reader Box: 99.88mm Height/119.84 Height w/ Cable Press

img

Warranty​

  • Full 1 year warranty for manufacturing defects.

Lifespan​

  • Considering that the equipment has not been subjected to impacts, falls or incorrect handling, it has a useful life of approximately 5 years indoors and 3 years outdoors (with exposure to sun, rain, heat and humidity, unless the necessary protections are provided).

Dispose and Recycle​

  • The product is made of aluminum parts, ABS plastic and electronic components containing silicon. Most of these materials are recyclable and can be reused. In the case of disposal, we strongly recommend that you do not throw it in the residential trash, on the contrary, send us the material with the proper identification of MATERIAL FOR DISPOSAL that we will make the correct forwarding for each type of material that can be recycled.