Skip to main content

Software Development Kit (SDK)

The development and test kit can be found in the restricted area, more specifically on the download page.

img

With this tool we can test the most varied features of RFID, as well as serve as an example code to develop solutions through desktop applications, because together with the "executable" file The kit also follows source code, includingyour dlls.

Installation​

After downloading it and unzipping the ". Zip" file it is possible to open the "executable", through the way:

.\MID10S_W_SDK - Leitor USB e Antena Integrada Wifi\DEMO\C#\UHFReader86Demo\bin\x86\Debug

If you don't have the Framework ". NET" Installed, SDK will ask you to install with administrator permission to run it

Instructions for use​

img

Then we must communicate SDK with the reader and thus access the software functionality, so it is necessary to make sure that the "RF Modo de Operação" of the reader is as "Modo Escravo" andThe computer is connected to the equipment network.

On the left side of the screen, we have the card "Ethernet", where we can configure the IP and the port of the equipment we want to communicate, as shown in the image above, we are using the reader's standard settings in this case.

After configured, click "Connect".

img

  • Firmware Version : SDK Version.
  • region : tag frequency operation range that should be read.
  • Power : reading power.
  • GPIO Operation : activation of the guquia.
  • Buffer EPC/TID LENGHT : EPCS Size or TIDS read.
  • Beep : active Buzzer when doing readings.
  • Baudrate : configures communication baudrate.

img

  • EPC : electronic Product Code.
  • TID : number of Chip manufacturer's exclusive tag id (cannot be changed).
  • Session : power of the load performed in the tag.
  • Max-ScanTime : scanning time of readings.